MI053 Differential Probe
Differential X10/X100 Oscope Probe | |
The
ADF25A is an active differential oscilloscope probe. The
probe permits the measurement of signals which are not
referenced to earth using a conventional earthed
oscilloscope. This enables mains voltages to be tested. It
is possible to measure and observe the waveforms of three
phase supplies or the gate / control signals of
semiconductor circuits. It is ideal for investigation of
motor speed controls, uninterruptible power supplies, switch
mode power supplies and process controllers.
P | |
| Attenuation ranges | 10:1 / 100:1 |
|---|---|
| Input Voltage | ± 70V DC Inc Pk (10:1) ± 700 V dc Inc Pk (100:1) |
| Max differential | ac @ 10:1 or 50 V rms Cat
III ± 700 V DC Inc Pk ac @ 100:1 or 500V rms Cat III ± 2400 V DC Inc Pk |
| Bandwidth | DC to 25 MHz (-3 dB) |
| Accuracy | ± 2% |
| Rise time | 14ns |
| Input impedance | 4 MΩ / 5.5 pF each side to ground |
| Power requirements | 4 x AA cells or 6 V / 60 mA DC mains adapter |